Been noticing a loud hissing sound at he engine compartment, coming from behind the engine, towards the firewall. A close inspection discovered that there’s a tear on the air filter box seal. The fix is very simple, just use some 3M double side tape to secure the loose foam seal.
Check out the red colour 3M double sided tape, with the protector yet to be removed.
Discovered this while cleaning my K&N air filter, cleaned my throttle at the same time. 
Moving my car into my porch with auto gate fail to fully deployed has cause the gate to slice my front bumper leaving a 6” cut right next to my bumper light. Darn.. 
The consolation was it didn’t damage my bumper light.. phew~..
So I took off my bumper and sent it for repair.
First, open the top 4 big screws..
Lift up the rubber liner seal..
Unscrew bottom 7 screws.. check out the scrubs under the lip... 
.. 2 fender arch screws each side..
2nd screws..
.. rip the fender liner and 2 more inside.. (1st)
2nd..
slide the clip out (plastic portion).. the metal clip remain on the bumper.. and unplug the fog light sockets.. Notice the nasty cut at 12 o’clock?! 
Viola! .. less than 10 min..
Removing the fog lights..
.. going to the paint shop..
1 for the album! Say “Cheeszzz… ” 
Bumper repaired, sprayed, enjoying sun bathing..
Securing my big mouth to prevent stones hitting my radiator.
Thank you for reading, comments are welcome!
