Sunday, 15 May 2011

BMW E90 320i DIY Removal of Front Bumper

Moving my car into my porch with auto gate fail to fully deployed has cause the gate to slice my front bumper leaving a 6” cut right next to my bumper light. Darn.. Crying face The consolation was it didn’t damage my bumper light.. phew~..

So I took off my bumper and sent it for repair.

First, open the top 4 big screws..

P1030067

Lift up the rubber liner seal..

P1030069

Unscrew bottom 7 screws.. check out the scrubs under the lip... Smile

 

P1030068

.. 2 fender arch screws each side..

P1030070

2nd screws..

P1030071

.. rip the fender liner and 2 more inside.. (1st)

P1030073

2nd..

P1030075

slide the clip out (plastic portion).. the metal clip remain on the bumper..  and unplug the fog light sockets.. Notice the nasty cut at 12 o’clock?! Smile with tongue out

P1030077

Viola! Smile .. less than 10 min..

P1030078

Removing the fog lights..

P1030077-1

.. going to the paint shop.. Smile

P1030080

1 for the album! Say “Cheeszzz… ” Open-mouthed smile

P1030083

Bumper repaired, sprayed, enjoying sun bathing.. Smile

 M1

Securing my big mouth to prevent stones hitting my radiator.

P1030309

Thank you for reading, comments are welcome!

Winking smile