DIY Disclaimer: I hold no responsibility should anything goes wrong when you decided to follow my guide. It’s strictly meant as a reference for knowledge sharing purposes.
Part number: 84820-B0010
A new switch would set you back USD39.98
Carefully pry open the bottom of the power window controller.
Carefully lift up the printed circuit board
You will notice the failed switch has a broken white color plastic which is responsible to maintain the position of the rocker/flipper switch.
Viola! Discovered “Satay” stick is the perfect replacement for the broken plastic.
Cut the “Satay” stick to the required size
When reinstalling the printed circuit board, make sure the white color switch slide is in the middle and fitted into the roker switch.
Test the switch. If too tight, the Satay is too long, vice versa.. 
No comments:
Post a Comment